JOBO CARcam, Инструкция по эксплуатации

Страница: 4 / 6

4
GB
www . jobo . com
In the normal On Screen Display (OSD) the loop recording is symbolized by a pictogram. The chosen video
sequence length is also indicated underneath the pictogram.
5. Motion detection:
If this feature is activated, the camera will instantly start recording when turned on as soon as a movement is
detected within the viewing angle of the CARcam. After 10 seconds without motion within viewing angle the
camera recording is switched off again. As soon as a new movement is detected the recording automatically
restarts.
This allows for use of surveillance purposes as long as the camera battery is fully charged or as long as the camera
is connected to the car power supply.
When the motion detector is activated the pictogram of a runner is shown in the OSD.
6. Recording:
The sound recording can be activated or deactivated. If sound recording is activated the pictogram of a
microphone is shown in the OSD.
7. Regular OFF-screen
This function allows you to activate auto-power off of the display after 2, 5, or 10 minutes of making no camera
settings. If this setting is activate the camera will not power off. Only the display will be blank while the camera
will still be operating. We recommend to keep this function deactivated.
8. G-Sensor (Gravity Sensor)
This is a very important feature, developed for dash cameras.
The built-in Gravity sensor senses any impact and will protect the corresponding video file against being over-
written. This will avoid important recordings from being lost (“Black-Box-Function”). We recommend to activate
this function, especially when making cyclic recordings (loop recordings). If the G-Sensor is activated this is
indicated by a pictogram of a car with illustrated vibration.
Main Settings (symbol of a wrench)
1. Date / Time.
Before initial operation we recommend you to set correct time and date. The time and date set here can be
recorded in the video and shown in play-back (see point 11 below).
2. Auto Power off:
With this setting you can activate complete auto-power off of the camera after 2, 5, or 10 minutes of making no
camera settings. If this setting is activate the camera will completely power off. We do not recommend you to
activate this option.
3. Beep Sound:
The beep sound during menu operation can be activated or deactivated
4. Language:
You can choose any of the following languages: English, German, French, Spanish, Italian, Portuguese, Chinese,
Japanese, and Russian.
5. TV-Mode:
You can choose between the European PAL-Standard or the American NTSC setting.