JOBO AEE JIB 4, Руководство пользователя

Страница: 38 / 40

www.jobo.com
38
3. If necessary, such as under low temperature (under 20°C), it is suggested to let the surface of 3M double-sided foam
sticker heat up (with hair drier or something else) before sticking.
Tips
1. The surface of camera might be warmed up after a long working time.
2. If the camera would not be used for a long time, it’s advised to take out batteries and charge every six months to
keep them in good working condition.
3. The function of digital zoom shall reduce the image quality slightly.
4. The angle of view might vary with different working modes.
5. it’s advised to play larger video files by computer or other professional players to realize smooth playing.
FCC Notices
1. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this
equipment. Such modifications could void the user's authority to operate the equipment.
2. This device complies with Part 15 of the FCC Rules. (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.