13
ASSEMBLY INSTRUCTIONS (CONT.)
5) Grass collection box assembly. Assemble two
the lugs.(Fig.1g)
7) Before using, always visually inspect to see that the blades, blade bolts and
cutter assembly are not worn or damaged. Replace worn or damaged blades
and bolts in sets to preserve balance.
8) Keep all nuts, bolts and screws tight to be sure the equipment is in safe
working condition.
CUTTING HEIGHT ADJUSTMENT
To obtain the desired cutting height, the front and rear axles are repositioned on the
underside of the mower housing.
Warning
! Disconnect the mower from the power supply and ensure the blade
has stopped coasting before adjusting the height.
1). Turn the mower upside down.
2). Pull the wheel axle towards the front of the mower.
3). Locate the wheel asle into the desired cutting height adjustment position.
Note: Make sure that both front right and left wheel are located in the same cutting
height adjustment position.
1f
1g
1. To adjust the front wheel cutting height position.(fig.2a)