background image

2

GENERAL POWER TOOL 

SAFETY WARNINGS

 

WARNING! 

Read all safety warnings and all 

instructions. Failure to follow the warnings 

and instructions may result in electric shock, fire 
and/or serious injury. 

Save all warnings and instructions for future 
reference.

The term “power tool” in the warnings refers to 
your mains-operated (corded) power tool or battery-
operated (cordless) power tool.

1)  Work area safety
a)  Keep work area clean and well lit. 

Cluttered or 

dark areas invite accidents.

b)  Do not operate power tools in explosive 

atmospheres, such as in the presence of 
flammable liquids, gases or dust.

 Power tools 

create sparks which may ignite the dust or 
fumes.

c)  Keep children and bystanders away while 

operating a power tool. 

Distractions can cause 

you to lose control.

2)  Electrical safety
a)  Power tool plugs must match the outlet. Never 

modify the plug in any way. Do not use any 
adapter plugs with earthed (grounded) power 
tools. 

Unmodified plugs and matching outlets will 

reduce risk of electric shock.

b)  Avoid body contact with earthed or grounded 

surfaces, such as pipes, radiators, ranges 
and refrigerators. 

There is an increased risk 

of electric shock if your body is earthed or 
grounded.

c)  Do not expose power tools to rain or wet 

conditions. 

Water entering a power tool will 

increase the risk of electric shock.

d)  Do not abuse the cord. Never use the cord for 

carrying, pulling or unplugging the power tool. 
Keep cord away from heat, oil, sharp edges 
or moving parts. 

Damaged or entangled cords 

increase the risk of electric shock.

e)  When operating a power tool outdoors, use an 

extension cord suitable for outdoor use. 

Use of 

a cord suitable for outdoor use reduces the risk 
of electric shock. 

f)  If operating a power tool in a damp location 

is unavoidable, use a residual current device 
(RCD) protected supply. 

Use of an RCD reduces 

the risk of electric shock. 

3)  Personal safety
a)  Stay alert, watch what you are doing and 

use common sense when operating a power 
tool. Do not use a power tool while you are 
tired or under the influence of drugs, alcohol 
or medication. 

A moment of inattention while 

operating power tools may result in serious 
personal injury. 

b)  Use personal protective equipment. Always 

wear eye protection. 

Protective equipment 

such as dust mask, non-skid safety shoes, hard 
hat, or hearing protection used for appropriate 
conditions will reduce personal injuries.

c)  Prevent unintentional starting. Ensure the 

switch is in the off-position before connecting 
to power source and/or battery pack, picking 
up or carrying the tool. 

Carrying power tools 

with your finger on the switch or energising 
power tools that have the switch on invites 
accidents.

d)  Remove any adjusting key or wrench before 

turning the power tool on. 

A wrench or a key left 

attached to a rotating part of the power tool may 
result in personal injury. 

e)  Do not overreach. Keep proper footing and 

balance at all times. 

This enables better control 

of the power tool in unexpected situations. 

f)  Dress properly. Do not wear loose clothing 

or jewellery. Keep your hair, clothing and 
gloves away from moving parts. 

Loose clothes, 

jewellery or long hair can be caught in moving 
parts.

g)  If devices are provided for the connection of 

dust extraction and collection facilities, ensure 
these are connected and properly used.

 Use of 

these devices can reduce dust-related hazards.

4)  Power tool use and care 
a)  Do not force the power tool. Use the correct 

power tool for your application. 

The correct 

power tool will do the job better and safer at the 
rate for which it was designed. 

b)  Do not use the power tool if the switch does 

not turn it on and off. 

Any power tool that cannot 

be controlled with the switch is dangerous and 
must be repaired.

c)  Disconnect the plug from the power source 

and/or the battery pack from the power tool 
before making any adjustments, changing 
accessories, or storing power tools. 

Such 

preventive safety measures reduce the risk of 
starting the power tool accidentally. 

d)  Store idle power tools out of the reach of 

Содержание JM1000RHD













Отзывы: