background image

 

 

Make sure that any attachments are securely assembled. 

   

Never point any nozzle or sprayer toward a person or any part of the body. 

 

Equipment can cause serious injury if the spray penetrates the skin.  

 

Risk of Fire or Explosion 

 

Potential hazards 

 

 

Abrasive tools such as sanders and grinders, rotating tools such as 

drills, and impact tools such as nailers, staplers, wrenches, hammers, 

      

and reciprocating saws are capable of generating sparks which could 

             

result in ignition of flammable materials. 

 

 It is normal for the compressor motor and pressure switch to produce 
sparks while operating. If sparks come into contact with vapo

u

rs from 

gasoline or other solvents, they may ignite, causing fire or explosion. 

 

 Exceeding the maximum pressure rating of tools or accessories could 

cause an explosion resulting in serious injury. 

 

Preventive measures 

 

Never operate tools near flammable substances such as gasoline, 

      

cleaning solvents, etc. 

 

Work in a clean, well-ventilated area free of combustible materials. 

 

Never use oxygen, carbon dioxide or other bottled gases as a power source for air tools. 

  Use compressed air regulated to maximum pressure at or below the rated 

pressure of any attachments. 

  Never connect to an air source that is capable of exceeding 200 PSI. 

  Prior to using the tool always verify that the air source has been adjusted to the 

rated air pressure of the tool. 

  Never spray flammable liquids in a confined area. Do not spray where sparks or 

flame are present. 

  Do not smoke while spraying. 

  Keep compressor as far from spray area as possible.  

Risk of Hearing Loss 

 

Potential hazard 

 

Long term exposure to noise produced from the operation of air tools 
can lead to permanent hearing loss. 

 

Preventive measures 

 

Always wear ANSI S3.19 hearing protection when using a compressor.

 

 

Manual 58-7992 V 1.7 – 8 Gallon compressor 

2005-7-1

9

 

4

Inhalation Hazard 

 

Potential hazards 

 

Abrasive tools such as grinders, sanders, and cut-off tools generate dust 
and abrasive materials which can be harmful to human lungs and respiratory system. 

 

Some materials such as adhesives and tar contain chemicals whos

e

 vapo

u

rs could causeserious 

      

injury with prolonged exposure.

  

Содержание 58-7992-0



















Отзывы: