jobmate 054-7236-0, Инструкция по эксплуатации, Страница: 12 / 18

12
ON / OFF SWITCH
To turn the detail sander ON, press the left
side of the ON/OFF switch (1) (Fig. 4). To
turn the sander OFF, press the right side
of the ON/Off switch (2).
WARNING:
Always wear safety
goggles or safety glasses with side shields
when operating your detail sander. Failure
to do so could result in foreign objects
being thrown into your eyes resulting in
possible serious eye damage.
Always wear an appropriate dust mask
and hearing protection when using your
detail sander.
!
ASSEMBLY AND OPERATION
Fig. 4
WARNING:
Have you read “GENERAL SAFETY WARNINGS”, “POWER
TOOL SAFETY”, “SPECIFIC SAFETY RULES”, EXTENSION CORD SAFETY” and
“SYMBOLS” on pages 3, 4, 5, 6, 7 & 8 of this Manual? If not, please do it now
before you operate this detail sander. Your safety depends on it!
Every time you use the detail sander you should verify the following:
1. Detail sander cord is not damaged.
2. Safety glasses and dust mask are being worn.
3. Sandpaper is the correct type for the job.
4. Sandpaper is in good condition and properly installed.
Failure to adhere to these safety rules can greatly increase the chances of
injury.
!