Joab EcoDrive, Руководство по эксплуатации и обслуживанию

Страница: 35 / 73

27
Radio Controllers
A radio operated controller can be bought as an option for all EcoDrive Hook-Lifts. These allow
for operation of the hook-lift remotely. The operator does not need to be in the vehicle to oper-
ate the hook-lift.
The use of a radio controller allows the operator to have a good visual overview of the lifting
operation. This can be beneficial in many aspects.
When the radio controller is active, the CBW controller, mounted inside the cab, can not be oper-
ated
.
Before Operation
Personnel must be trained in the use of radio controllers before being allowed to use
them. Serious injury or damage to the environment can result if a radio controller is
operated incorrectly.
The operator must make sure that they are fully aware of the surrounding environment and
equipment.
The operator must be fully focused on the operation of the controller and
lifting equipment. Do not operate the radio-controller when performing
other tasks.
Make sure that a safe working distance of at least four meters exists
around the lifting equipment. Failure to do so can lead to serious injury.
Do not leave a radio controller unattended. When the controller is not in
use, make sure it is turned off.
Operation
Provided below is an overview of the radio controller for EcoDrive Hook-
Lifts.
Operation of the hook-lift is made using the main control buttons 1-12, as
shown opposite.
Information regarding operation is displayed in the controller's display,
located at the top of the controller.
EcoDrive manual: 13300 Edition 1 | 2019-01-31