Joab EcoDrive VL10U, Руководство по эксплуатации и обслуживанию

Страница: 25 / 57

19
Radio Controller
A radio operated controller can be bought as an option for all skip-loaders. These allow for
operation of the skip-loader remotely. The operator does not need to stand at the control panel
to operate the skip-loader.
The use of a radio controller allows the operator to have a good visual overview of the lifting
operation. This can be beneficial in many aspects.
Before Operation
Personnel must be trained in the use of radio controllers before being allowed to use
them. Serious injury or damage to the environment can result if a radio controller is
operated incorrectly.
The operator must make sure that they are fully aware of the surrounding environment and
equipment.
The operator must be fully focused on the operation of the controller and lifting equipment. Do
not operate the radio-controller when performing other tasks.
Make sure that a safe working distance of at least ten meters exists around the lifting equip-
ment. Failure to do so can lead to serious injury.
Do not leave a radio controller unattended. When the controller is not in use, make sure it is
turned off.
Operation
Operation of the skip-loader is made using the main control buttons 1-12, as
shown opposite.
Information regarding operation is displayed in the controller's display, loc-
ated at the top of the controller.
Buttons 1–8 are analogue. Pressing these buttons harder will cause the oper-
ation that it controls to happen faster. Alternatively, these buttons can be set
to simply have an ON/OFF function.
Buttons 9–12 are digital and used for simple functions, such as the operation
of the rotator and the tipping-hook.
The buttons 1–12 are multifunctional. That is, they have more than one func-
tion assigned to them. See "
"Function Mode", on page 20 " below.
EcoDrive VL10-VL18 manual: 1021046 Edition 2 | 2022-05-02