JNJ SPAS SPA-329, Руководство пользователя

Страница: 3 / 13

3
On the “ off” status and the preheat and circulation cleaning without working, press “
HOUR ”
or “
MIN ”
key to start time setting.
。
The “
：
” signal will stop to flash, but the minute and hour will flash at this time
。
To press the “
HOUR
”key one time
，
will add one hour, the hour number will be displaying on the screen.
Pressing the“
HOUR
” without stop, the hours will increase continually till stop pressing the key. The hours
adjustment range is
AM 0~PM 11
.
To press the “
MIN
”key one time ， will add one minute, the minute number will be displaying on the screen.
Pressing the“
MIN
”without stop, the minutes will increase continually till stop pressing the key. The minutes
adjustment range is
0-59
.
After finishing the time setting, the system will quit out the time setting mode in 6 seconds.
4) Operation to circulation-cleaning setting ：
Only one circulation-cleaning program can be set in one day in a spa. The circulation cleaning working status will
be displaying on the LCD screen. When it works or can not see from the screen. If the “ ” signal is
displaying on the screen, it indicates the circulation-cleaning is on, and the “ ” signal is disappeared, it
indicates the circulation cleaning is off. See following Fig ﹒ 5-6.
AM AM
Fig
﹒
5
：
Circulation-cleaning off Fig
﹒
6
：
Circulation-cleaning on
All the setting steps of circulation-cleaning must be operated on the “off” status, the LCD screen will be displaying
“
---
”
at this status.
(1) 、 Press “
PUMP3
”， to enter the Circulation-cleaning setting model, and the screen will flash the
“ ”
signal.
(2)
、
Press“
OPEN
”
，
can start the c
irculation-cleaning setting
(If press“
CLOSE
”key, or without any pressing
in 6 seconds ,the circulation-cleaning will be shut down, and the system will quit out the setting model
automatically.
），
And this time
，
“ ”signal won’t flash
。
The system enter into the setting mode for the
start time of circulation-cleaning setting, the screen will flash a time number (this time is the start time of the
circulation-cleaning.),
at this moment
，
press the “
MIN
”and“
HOUR
” key to set the time.