- 7 -
Picture 5 Display layout diagram
When the system is powered on, the controller enters into standby mode, the battery icon and the
load icon light up, and related data occur in certain area (corresponding to the monitoring fields,
battery voltage is displayed as default setting when open). When load works, load icon lights up, at
the same time, the arrow between the battery and the load starts running. When load is shut off, load
radiance and arrow vanish. When Photovoltaic panels are connected, the sun and photovoltaic icon
light up, and the arrow between the battery and the sun/ photovoltaic panels starts running at the
same time. If not charging, the sun/ photovoltaic panels icon vanish and the moon icon lights up.
When press the corresponding button, the corresponding field lights up on the screen. And you can
set the related parameters. Each field definition shows in the table below.
Field name
Definition
Function
V battery
The battery
voltage
Field lights up, the present battery voltagehe shows in
the display area
V PV
Photovoltaic
panels
voltage
Field lights up, the Photovoltaic panels voltage shows
in the display area
I charge
Charging
current
Field lights up, the present battery charging current
shows in the display area
I load
Discharging
current
Field lights up, the present battery discharging current
shows in the display area
Under
Over
discharge
Field lights up, battery discharge voltage can be set.
when the battery is under voltage, the field flashes.
Under-R
Over
Field lights up, battery over discharge recovery voltage