HYDRAULIC/PNEUMATIC BENDER
P/N 1005
WARNING
Read and understand all warnings, instructions and manual information
before attempting to use this equipment.
1.
Because of the precision air return NEVER store or leave the cylinder in the
full extended/open position. If left in the extended position the hydraulic
fluid will drain from the cylinder. When the air supply is reattached the
cylinder could retract uncontrollably and could cause equipment damage
and/or sever personal injuries. Use extreme care when reattaching the air
supply to the bender. Make sure there are no dies, pins, body parts on the
bender when reattaching the air source to the pump.
2.
User assumes all risks when using this product.
3.
Always pay close attention to what you are doing. Turn off cell phone,
pager, etc when using this machine.
4.
This machine is meant to be operated by competent individuals who have a
thorough understanding of tube bending and machines in general.
5.
The bender is intended to be used by a single operator. Never allow a
second individual to operate the machine while another holds tube.
6.
Always wear eye protection while operating tube bender.
7.
Never put your hands or other body parts into bender apparatus.
8.
Never wear loose clothing while operating tube bender.
Содержание 1005
Страница 6: ......
Страница 7: ...Figure 1 Bender overall view Figure 2 Bends start at edge of radius die ...
