The Best Wireless Solution
http://www.jmpsystem.com
2) Step1 : Input MAC Address of the other party
FWB2411 minimize interference with other products by registration MAC address
of both parties. So, after registration MAC address of the other party,
communication in available.
- Write ‘rfdst’. It is possible to discern MAC of other party
# rfdst
************************************
RF DST MAC
************************************
0] ff:ff:ff:ff:ff:ff
1] ff:ff:ff:ff:ff:ff
2] ff:ff:ff:ff:ff:ff
3] ff:ff:ff:ff:ff:ff
4] ff:ff:ff:ff:ff:ff
Continue ?[Y/n]n
#
Default value is ff:ff:ff:ff:ff:ff
- To change ‘0]’ value, write ‘rfdst 0’.
# rfdst 0
************************************
RF DST MAC
************************************
0] ff:ff:ff:ff:ff:f -> 00:06:7a:00:00:04
#
Caution
: Should write ‘:’between bytes.
- In case of P2P or P2MP’s slave, ‘0]’ term is only available.
- In case of P2MP’s master, write MAC from 0 to 16 as many as slaves.
- Try communication by means of ‘Ping test, FTP, etc’
- RD, TD, RX, TX LED blink
Содержание FWB2411
Страница 2: ......