JML Aero360 Steam Pro, Использование

Страница: 9 / 12

Cleaning and Storage
CAUTION!
■ Pull the Mains plug out of the plug socket and allow the device to cool down
completely before doing any cleaning!
■ Never immerse the device, the mains cable or the mains plug in water or other liquids!
■ Do not use any corrosive or abrasive cleaning agents or cleaning pads to clean the
device. These can damage the surface.
• Clean the device and the Nylon balloon if necessary with a slightly damp cloth and a
little mild detergent if required. Then wipe down fully with a dry cloth.
• Allow all parts to dry completely before you put them away.
• Store the device in a clean, dry place that is protected from sunlight and is not
accessible to children and animals.
Troubleshooting
If the device does not work properly, check whether you are able to rectify the problem
yourself.
Do not attempt to repair a defective electrical device yourself!
Problem Possible cause / solution
The device does not
work. The LEDs do
not light up.
• Is the Mains plug inserted in the Plug socket correctly?
Correct the fit of the mains plug.
• Is the plug socket defective? Try another plug socket.
• Replace fuse if necessary.
• Is the device switched on? Set the timer (
6
) to a time.
Unusual noises
• Are the ventilation slots (
5
) covered up or blocked? Free up
the ventilation slots ( 5 ).
The device switches
off suddenly.
• Are the ventilation slots ( 5 ) covered up or blocked? Free up
the ventilation slots ( 5 ).
• The device has an automatic safety switch-off
function. It switches off automatically if it overheats.
Allow the device to cool down and switch it on again.
• Has the device fallen over? The device has a protective
switch that is activated if the device falls over. Set the de-
vice up again and switch it back on.
• Has the set time elapsed? Set the timer (
6
) to the time you
want again.
Odour produced
• You might notice a slight odour caused by production
residues the first time you use the device. However, this is
harmless and will cease as you use the device.