This unit incorporates an IPhone/IPod docking function, your favourite songs in the IPhone/IPod can playback through this unit, a
range of adaptors are supplied for various IPod models
FACTORY RESET
When you move the radio to another part of the country, your pre-tuned and stored DAB stations may no longer be available. If this is
the case then you will need to reset your radio back to its original factory settings, to perform a factory reset, please do the following.
1. Ensure the unit is connected to AC mains.
2. Plug the radio to mains and press the STANDBY/ON button once to turn the radio on.
3. Depress and hold the FUNCTION button unit the display shows “Press Enter Key to Reset”
4. Press the SELECT button once, the display will show “System reset OK” and then finally perform full auto scan function.
5. After the scan has finished, the radio will select and display the first alphanumerically found station.
Note: All of your stored DAB & FM pre-sets will be lost once the reset has taken place, the radio will automatically switch between
stereo & mono mode, but you can override this & switch this function manually which is helpful for poor signal reception
9
For Customer Services & Spare Parts please call
01204 664 084
, Opening times: Monday-Friday 9am until 6pm
IPHONE/IPOD SETUP:
1. Select an adaptor (this is not supplied) which matches your iPod model and install it into the
docking tray, and insert your iPhone/iPod into the docking tray.
2. Press the FUNCTION button to iPod mode, the display will show “Switch to iPod” and then
“iPod Connected”. (F11)
3. Press the SCAN/PLAY/PAUSE button.
4. To skip forward or back to other tracks during playback, press the SKIP/TUNE SEARCH (UP
or DOWN) button.
5. To select “iPod Menu”, press the MENU/INFO button.
6. To scroll down and up in the “iPod Menu”, press the PRESET/ARROW (UP or DOWN)
button.
7. To Confirm the selection in the “iPod Menu”, press the SELECT control.
