Jmaz Lighting VISION PROFILE 250Z RGBW, Руководство пользователя

Страница: 9 / 16

9
VISION PROFILE 250Z RGBW Product Datasheet
9 Ver 2.0 jmazlighting.com
Main Menu
Press the button to enter the Main Menu interface.
Menu
DMX
Advance
Mode
Dimmer
Addressing
All fixtures should be given a DMX starting address when using a DMX signal, so that the correct fixture
responds to the correct control signals. This digital starting address is the channel number from which
the fixture starts to listen to the digital control information sent out from the DMX controller. The allocation
of this starting address is achieved by setting the correct number on the display located on the base of
the device.
You can set the same starting address for all fixtures or a group of fixtures, or make different address for
each fixture individually.
If you set the same address, all the units will start to listen to the same control signal from the same
channel number. In other words, changing the settings of one channel will affect all the fixtures simulta-
neously.
If you set a different address, each unit will start to listen to the channel number you have set, based on
the quantity of control channels of the unit. That means changing the settings of one channel will affect
only the selected fixture.
In the case of the VISION PROFILE 250Z RGBW zoom, which is 1/2/3 channels fixture. If you set, for
example, the address in the 1 channel mode to channel 2, the device will use the channel 2 for control.