manualshive.com logo in svg

JMA AVANTCODE, Руководство пользователя

Поделиться
Скачать
JMA AVANTCODE Скачать руководство пользователя страница 46

 

40

4.4

 

EDIT 

FILE    

 

The machine comes equipped with a key editor which allows you to create and 

save your own keys, either because you are a lock manufacturer with special keys, 
because you master keys, or because a new key has been released onto the market 
which was not included in the machine. 

 

 
All of the keys created using the key editor can then be modified and even deleted. 
 
(NB: The files that come pre-installed in the machine by default, for door, car and 

commercial locks cannot be altered using the key editor, meaning that the user cannot modify or 
delete them.) 

 
The steps to create, modify or delete a file are described below: 

4.4.1

 

     CREATE FILE 

 

1.

 

Select “EDIT FILE” from the main menu. 
 

 
 
 
 
 
 
 
 
 

2.

 

Press the “CREATE FILE” icon. 
 

3.

 

Enter a key file name and select the type of key (flat or vertical-stop lock). The name can 
comprise letters or numbers (remember that to select various alpha-numeric characters you 
have to press the key more than once, depending on the position of the character). 

(See section 2.7.) 
 
 
 
 
 
 
 

4.

 

When you create or modify a file, you have to complete various tables. 

5.

 

The first one is as follows: 
(NB: Complete the fields and then press ENTER) 

 
 

 

              

              

 

Create file 

EDIT FILES 

File name: 

              ----------- 

Key type:   <> 

                     flat 

Содержание AVANTCODE












































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды