81900511 Rev. B
©2019 JMA Wireless. All rights reserved. This document contains proprietary information. All products, company names, brands, and logos are trademarks™ or
registered® trademarks of their respective holders. All specifications are subject to change without notice. Revised: July 8, 2019
+1 315.431.7100 [email protected]
Installation Guide
Stadium Mounting Bracket - Rotational
Instructions for Mounting Kit 91900324
14
15
Below is the optional extension bracket kit 91900313
for inverted mount of larger antennas.
Figure 10 shows antenna SX08FRO230-01 (for reference only) pictured
after being fitted with extension bracket kit 91900313.
Figure 10: Inverted mount
Figure 12: Connecting the extension bracket to the antenna
mount stadium bracket
Extension kit
91900313
Antenna mount
stadium bracket
3/8”-16 hardware,
4 PL as shown
Center mount
stadium bracket
#10-32 screw, 2 PL (for
locking bracket into
specific angle position
Wall/pipe mount
stadium bracket
Step 1: Removing the wall/pipe mount bracket from the antenna
mount stadium bracket. Do not throw away any hardware. Remove 2
sets of 3/8”-16 hardware and the #10-32 screw from the connection of
the center mount stadium bracket and wall/pipe mount stadium bracket.
Remove the wall/pipe mount bracket from the assembly.
Step 2: Installing the extension bracket. Install extension bracket
kit 91900313 by securing the extension bracket to the center mount
stadium bracket using 3/8” hardware and #10-32 screw from Step 1. All
3/8” hardware to be torqued to 20 lbf∙ft. See pages 16-17 for horizontal
and vertical mounting positions tables.
Figure 11: Removing the
wall/pipe mount bracket
Wall mount holes,
2 PL, using 3/8”
hardware, 4.50”
apart @ centerline
