JLL IC200 PRO Indoor Cycling, Инструкция по эксплуатации

Страница: 10 / 22

10
IC200 PRO ASSEMBLY
The bike has been assembled and tested at the factory, so you shouldn’t have any
problems putting all the parts together. Components are designed to fit together, and
only basic tools are required for the assembly process. Inside the box you will find a Tools
Pack (Hex Allen Key, Multi-tool, Washers and Bolts). See previous page.
To assemble your JLL IC200 PRO please follow these easy steps:
STEP 1
Attach the front and rear stabilizers to the main
frame using 4 x M8*20 Screws (Part 9), 4 x spring
washers and 4 x flat washers.
STEP 2
Attach the right and left pedals to their
corresponding cranks, turn the right pedal clockwise
and the left anti-clockwise.
STEP 3
Attach the handlebars to the handlebar post by
feeding the wire through the post and securing
using 3 x M8*16 Screws, 3 x spring washers and 3 x
flat washers.
STEP 4
Loosen the adjustment knob on the front of the bike
and insert the handebar post into the frame also
feeding the wire through.
Then tighten the knob back up.