JLG G10-43A Скачать руководство пользователя

Страница: 52 / 170

Section 3 - Controls and Indicators

3-10

31200150

Transmission Control Lever

Direction of Travel Selection

Transmission control lever (1) engages forward or reverse travel.

• Lift and push lever forward for forward travel; lift and pull lever rearward for

reverse travel. Move lever to centered position for neutral.

• Forward or reverse travel can be selected while in any gear.

• When traveling in reverse, the back-up alarm will automatically sound.

• Drive in reverse and turn only at slow rates of speed.

• Do not increase engine speed with the transmission in forward or reverse and the

service brake depressed in an attempt to get quicker hydraulic performances.
This could cause unexpected machine movement.

WARNING

TIP OVER/CRUSH HAZARD. Bring telehandler to a complete stop before
shifting transmission control lever. A sudden change in direction of travel could
reduce stability and/or cause load to shift or fall.

0034

Содержание G10-43A











































































































































































Результаты поиска

Содержание G10-43A

Отзывы:

Похожие инструкции для G10-43A

Бренды по названию

Популярные бренды

JLG G10-43A, Инструкция по эксплуатации и безопасности

Результаты поиска

Содержание G10-43A

Отзывы:

Похожие инструкции для G10-43A

Бренды по названию

Популярные бренды