JLG E450AJ, Руководство по эксплуатации и безопасности

Страница: 106 / 110

SECTION 7 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
7-16
31215012
4. Wheel nuts should be torqued after first 50 hours of operation
and after each wheel removal. Check torque every 3 months or
150 hours of operation.
7.6 SUPPLEMENTAL INFORMATION ONLY APPLICABLE
TO CE MACHINES
The following information is provided in accordance with the
requirements of the European Machinery Directive 2006/42/EC.
The A-Weighted emission sound pressure level at the work plat -
form is less than 70dB (A).
The vibration total value to which the hand-arm system is sub -
jected does not exceed 2,5 m/s
2
. The highest root mean square
value of weighted acceleration to which the whole body is sub -
jected does not exceed 0,5 m/s
2
.
Table 7-8. Wheel Torque Chart
TORQUE SEQUENCE
1st Stage 2nd Stage 3rd Stage
40 ft. lbs.
(55 Nm)
100 ft. lbs.
(130 Nm)
170 ft. lbs.
(255 Nm)