JLG 80SL, Руководство по техническому обслуживанию

Страница: 56 / 162

SECTION 3 - CHASSIS, PLATFORM & SCISSOR ARMS
3-20 – JLG Lift – 3121325
Air Filter Assembly
NOTE: Refer to Figure 3-18. when dismantling the Air Filter
for service and/or replacements. Follow the steps
below when removing/installing any components.
1. Removing the pipes and tubes requires loosening
the hose clamps. Once the hose clamps are loos-
ened, the tubes and pipes can be removed for main-
tenance or replacement.
2. To remove the Air Filter (1), unscrew and remove the
2 Bolts (2), four Flatwashers (4), and two Locknuts
(3). Remove the air cleaner from the bracket.
3. Lift the latches on the end of the Air Filter for access
to the safety element (not shown).
NOTE: When assembling the air filter system, take care to
securely fit all tubing and piping together and to
securely tighten all hose clamps.
1
2
3
4
5
6
7
8
9
10
11
12
13
Figure 3-18. Air Filter Assembly
1. Air Filter
2. Bolt, M8 x 45mm
3. Flatwasher, M8
4. Locknut, M8
5. Hose Clamp Clip
6. Air Intake Hose
7. Hose Clamp Clip
8. Reducing Sleeve
9. Clamp
10. Air Intake Elbow
11. Clamp
12. Air Intake Hose
13. Clamp