260MRT, 3394RT, 4394RT Auto leveling jacks
•
Auto Leveling Jacks - (Optional) –
When depressed the light will illuminate on the indicator pad, enabling that function for 5 seconds. Moving the control
handle forward will lower the leveling jacks. Moving the control handle backward will raise the leveling jacks. Once the
machine is level the jacks will discontinue extending and the jack set light will turn on.
NOTE: After initial ground contact is made, the auto level function
will pause 2-5 seconds and then begin to properly level
the machine. Once level, the tilt light on the platform control box will stop blinking.
•
NOTE: There is an override feature on the Auto Leveling system
that allows the operator to adjust (trim) the level of the
machine to the left or right when the platform is completely lowered. Use the following instructions to adjust the level of the
machine.
a. Select the leveling jack selection switch and
squeeze the trigger switch on the controller.
b. To adjust the leveling jacks to the left, activate the
switch on top of the controller to the left. To adjust
to the right, activate the switch on top of the controller
to the right. The leveling jack indicator light
or the side selected will be lit.
8
