JLG 15MSP Series, Руководство по эксплуатации и безопасности

Страница: 67 / 108

SECTION 3 - MACHINE CONTROLS, INDICATORS AND OPERATION
3121230 – JLG Lift – 3-41
3.14 RUG CARRIER ACCESSORY
(MSP - OPTION)
NOTE:
The Rug Carrier accessory is available only on the JLG MSP
model and is not authorized for use with any other JLG lift.
The Rug Carrier Accessory is intended for use in hanging
and removal of rugs in hanging display racks only. Use for
any other purpose is not authorized by JLG.
General
The Rug Carrier Accessory consists of two pivoting arms
mounted to the MSP platform left side rails. The pivoting arms
are locked in the plane of the platform side rail when not in use
(the stowed position) . The arms are locked into position at
approximately 90 degrees to the left side platform side rails
when in use
(the carry position) . The pivoting arms’ position can
be changed by lifting each arm to release the lock, rotating the
arm, and lowering each arm back into a locked position.
Pre-Start Inspection
Prior to use of the Rug Carrier accessory, check the following;
• Carrier arm mounting is secure to the platform railing, no
missing or damaged fasteners.
• The arm lock pins are in place and working properly.
Hanging a Rug using the Rug Carrier Accessory Arms
The following is a description for use of the Rug Carrier acces-
sory in hanging rugs on horizontal pivoting arm display racks.
1. Select the intended location in the display for mount-
ing the rug. Open the display rack to provide ade-
quate space for the MSP lift and rug.
2. With the Rug Carrier Accessory arms stowed, drive the
MSP into position prior to loading the rug.
3. Swing and lock Rug Carrier Accessory arms into the
carry position.
4. Load the rolled rug with the finished side facing the
platform. As required, use an assistant to load the rug
onto the Rug Carrier Accessory arms.
5. Make sure that the rug is centered over its length on
the Rug Carrier Accessory.
6. Elevate the platform to the required height for mount-
ing the rug onto the display arm.
7. Properly attach the rug to the display arm. Never
climb onto the platform rails for any reason.
8. After adequately attaching the rug to the display arm,
lower the platform, stow the Rug Carrier Accessory
arms.
9. As required reposition and elevate the MSP to com-
pletely attach the rug.