JLG 1250AJP, Руководство по эксплуатации и безопасности

Страница: 59 / 173

SECTION 3 - MACHINE CONTROLS AND INDICATORS
3-18 3121170
7. Footswitch/Enable Indicator
TO AVOID SERIOUS INJURY, DO NOT REMOVE, MODIFY OR DISABLE THE FOOTSWITCH
BY BLOCKING OR ANY OTHER MEANS.
FOOTSWITCH MUST BE ADJUSTED IF FUNCTIONS ACTIVATE WHEN SWITCH ONLY
OPERATES WITHIN LAST 1/4" OF TRAVEL, TOP OR BOTTOM.
To operate any function, the footswitch must be depressed
and the function selected within seven seconds. The enable
indicator shows that the controls are enabled. If a function is
not selected within seven seconds, or if a seven second lapse
between ending one function and beginning the next func-
tion, the enable light will go out and the footswitch must be
released and depressed again to enable the controls.
Releasing the footswitch removes power from all controls
and applies the drive brakes.
NOTE: Refer to Fuel Reserve/Shut-Off System in Section 4 for more
detailed information concerning the Low Fuel Indicator.
8. Fuel Level Indicator
Indicates the level of fuel in the fuel tank.
LOW FUEL
(FLASHES ONCE
PER SECOND)
1/4 TANK
½ TANK 3/4 TANK FULL TANK
EMPTY
(FLASHES TEN
TIMES
PER SECOND)
Figure 3-6. Fuel Level Indicator
To
order
go
to
Discount-Equipment.com