Press and hold button for 10 seconds.
Release.
Light will blink red and blue
to indicate pairing mode.
Select “JLab Epic ANC” in your
device settings to connect.
Light will slow blink blue
when Bluetooth is paired.
Turn Bluetooth off and then
back on in device settings.
In device settings,
forget the JLab Epic ANC.
Turn Bluetooth off then
back on in device settings.
Repeat
FIRST TIME SETUP:
BLUETOOTH PAIRING
directions.
If you still do not see JLab Epic ANC,
repeat
FIRST TIME SETUP: BLUETOOTH PAIRING
directions.
Bluetooth
Settings
CONNECTION TROUBLESHOOTING
I DO NOT SEE JLAB EPIC ANC IN MY DEVICE
Bluetooth
Settings
1
2
Bluetooth
Settings
1
JLAB EPIC ANC DOES NOT RECONNECT TO MY DEVICE AFTER POWERING ON
Bluetooth
JLab Epic ANC
Settings
i
Bluetooth
Settings
2
3
Note: The JLab Epic ANC can remember up to 8 devices. It will try to auto-connect to last device used.
BLUETOOTH IS CONNECTING TO AN UNWANTED DEVICE
2
JLab Gravity
Bluetooth
Settings
JLab Epic ANC
Bluetooth
Settings
JLab Epic ANC
1
If you have more than one device that was connected
to JLab Epic ANC, turn OFF Bluetooth on unwanted
devices and turn ON Bluetooth on chosen device.
