Continued on Next Page
SB-S-BRZ/1TW3 INSTR_SKU# 011353
Page 3 • JL Audio, Inc., 2016
S T E P 4
Remove the five clips that hold in the passenger side trunk
liner and remove the liner. Cut a 1/2” diameter hole in the
liner where marked in
Step 2
.
S T E P 8
Pictured is the assembly secured to the metal brace.
Note: The 3/8” Fender Washer isn’t shown in this image.
S T E P 3
Carefully unclip and remove the trunk sill panel.
S T E P 7
Attach the assembly from
Step 5
to the holes indicated
in Step 6 using a pair of 1/4 - 20 x 1” Bolts, four 1/4” Flat
Washers, two 1/4” Lock Washers, and two 1/4 - 20 Hex Bolts
as illustrated.
S T E P 2
Using a Phillips head screwdriver, remove the subwoofer
from the Stealthbox®. Place the enclosure into position and
use a Sharpie® to mark the location of the hole in the box
onto the trunk liner. Remove the enclosure.
Note:
It is not necessary to remove the grille before
removing the subwoofer.
S T E P 6
Pictured is the passenger side of the trunk with the trunk
liner removed. Locate the two indicated holes in the metal
brace.
S T E P 1
Empty out the trunk of the vehicle.
S T E P 5
Create the illustrated assembly using a 3/8 - 16 x 2” Bolt,
a 3/8” Lock Washer, a 3/8 - 16 Hex Nut, and a 3/8” Fender
Washer.
