Page 5 • JL Audio, Inc., 2016
Continued on Next Page
S T E P 16
Thread a 1/4 - 20 x 1” Serrated Flange Head
Bolt through each of the three holes in the
U-Bracket, into the threaded inserts in the
bottom of the enclosure as shown, and hand
tighten.
S T E P 15
Slide the upper hole in the Side Bracket over
the M8 - 1.25 x 30 mm Button Head Cap
Screw installed in
Step 9
. Thread an M8 - 1.25
Serranted Flange Locknut over the M8 - 1.25
x 30 mm Button Head Socket Cap Screw, and
hand tighten.
S T E P 14
Slide the Stealthbox® into position between
the upper and lower frame rails.
S T E P 13
Thread a pair of 1/4 - 20 x 1” Serrated Flange
Head Bolts through the holes in the side of
the Side Bracket, into the threaded inserts in
the side of the enclosure as shown, and hand
tighten.
S T E P 12
Remove the outer bolt and nut from the rear
frame rail. These will be reinstalled in
Step 17
.
S T E P 11
Remove the outer bolt and nut from the front
frame rail. These will be reinstalled in
Step 17
.
S T E P 10
Locate the two indicated outer bolts on the
frame rails.
S T E P 9
Install the M8 - 1.25 x 30 mm Button Head Cap
Screw in place of the bolt removed in the
previous step, and fully tighten.
SB-H-PIO7/10TW3 INSTR_SKU# 011461
