Page 4 • JL Audio, Inc., 2016
Continued on Next Page
S T E P 8
Locate the indicated hole in the frame in the
rear, center of the vehicle. This will be used for
the rear of the Inner Side Bracket in
Step 12
.
Note: Plastic panel has been removed for
clarity, but removal is not necessary for
installation.
S T E P 7
Locate the indicated hole in the frame in the
front, center of the vehicle. This will be used
for the front of the Inner Side Bracket in
Step
11
.
S T E P 6
Remove the remaining retaining clips and
three screws from the driver’s side plastic tub,
and remove the tub from the vehicle.
S T E P 5
Remove the plastic side panel from the vehicle.
S T E P 4
Remove the retaining clips from the plastic side
panel.
S T E P 3
Remove the four factory bolts from the driver’s
door hinge, and remove the door.
S T E P 2
Fold the seat bottom forward, and remove it
from the vehicle. Lift up on the base of the
seat back to release it, and remove it from the
vehicle.
S T E P 1
Empty the vehicle.
SB-H-PIO5/10TW3 INSTR_SKU# 011453
