Page 7 • JL Audio, Inc., 2013
M I D/H I G H FR E Q U E N C Y D R I V E R FI TM E N T
A variety of JL Audio coaxial and component systems will fit in the factory speaker locations of you vehicle.
Front Speaker Size / Location: 6-1/2”- Front Doors
Fits JL Audio Models: TR650-CXi, TR650-CSi, C2-650x, C2-650,
C3-650, C5-650x, C5-650, & ZR650-CSi
Rear Speaker Size / Location: 6-1/2”- Rear Door
Fits JL Audio Models: TR650-CXi, TR650-CSi, C2-650x, C2-650,
C3-650, C5-650x, C5-650, & ZR650-CSi
All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, “Stealthbox” and the Stealthbox logo are registered trademarks of JL Audio, Inc.,. “Ahead of the Curve”
and its respective logo is a trademark of JL Audio, Inc.,.
Printed in USA • ©2013 JL Audio, Inc.,. • U.S. PATENTS: #5,734,734 #5,949,898 #6,118,884 #6,229,902 #6,243,479 #6,294,959 #6,501,844 #6,496,590 #6,441,685 #5,687,247 #6,219,431
#6,625,292 #D472,891 #D480,709 Other U.S. & Foreign patents pending. For more detailed information please visit us online at
www.jlaudio.com.
(954) 443-1100
w w w. j l a u d i o . c o m
JLA-SKU# 94584-86 • ver. 11.22.2013
• 10369 NORTH COMMERCE PARKWAY • MIRAMAR, FLORIDA • 33025 • USA
S T E P 27
Slide a 3/8 x 1-1/4” Fender Washer, a 3/8” Lock
Washer, and a 3/8 - 16 Nut over the 3/8 - 16 x 3”
Set Screw and fully tighten.
Be sure the 3/8 -16 x 3” Set Screw does not
protrude past the back of the 3/8” Nut more
than 1/4”.
S T E P 26
Connect the speaker cable to the terminal cup
on the back of the enclosure. Place the enclo-
sure back into position, allowing the 3/8 - 16
x 3” Set Screw to pass through the hole in the
back of the enclosure.
S T E P 25
Reinstall the passenger side panel, allowing the
3/8 -16 x 3” Set Screw to pass through the hole
made in
Step 18
.
CO N G R AT U L AT I O N S!
You have completed the installation for this model! Enjoy your new Stealthbox®!
How we play.
™
SB-H-CRV2/10TW3 INSTR_SKU# 011371
S T E P 27
Reinstall the subwoofer.
