Page 4 • JL Audio, Inc., 2019
Continued on Next Page
S T E P 8
Reinstall the two seat bolts, and hand tighten.
S T E P 7
Carefully lower the enclosure into position,
allowing each Bracket to fit over the seat
bracket. Align the hole in each Bracket with the
factory seat bolt hole.
S T E P 6
Place the Stealthbox® in the vehicle.
S T E P 5
Align a Bracket to the back of the enclosure
as shown. Slide a 3/8” Split Lock Washer and
a 3/8” Flat Washer over each of two 3/8 - 16
x 1-1/2” Hex Head Bolts, pass an assembly
through each slot in the Bracket, into the
threaded inserts on the back of the enclosure,
and hand tighten.
Repeat for the opposite side.
S T E P 4
Remove the seat bolt.
Repeat for the opposite side.
S T E P 3
Locate the outer seat bolts.
S T E P 2
Fold the seat bottoms up.
S T E P 1
Empty the rear seat area.
SB-GM-SLVCC4/12TW3 INSTR_SKU# 011512
