➔
Continued on Page 4
➔
➔
➔
➔
➔
STEP 17: A)
Line up small angle bracket to front
middle of OEM inner(cut) console and mark hole.
STEP 17: B)
Using an 1/8” drill bit, drill
marked hole.
Cont.
From
Page 2
➔
➔
STEP 17: C)
Mount the small angle bracket using
the suppied black rivet and small washer.
STEP 18:
Place inner (cut) OEM console inside
outter OEM console / top of Stealthbox.
Drill six holes using 1/8” drill bit. Using the OEM
inner console’s lid mounting holes as guides.
STEP 19:
Using the six(out of seven) T-15 Torx
bolts that was removed in
STEP 10
, mount lid.
STEP 20:
With lid mounted, drill “7th” hole
using a 1/8” drill bit.
Don’t forget to bolt down lid strap with the
7th t-15 Torx screw.
S B - F - RT E K C T R / 1 2 W 3 v 2 - D 2 , J L AU D I O, I n c 2 0 0 2
S h e e t S K U # 0 1 1 1 5 9 R ev i s i o n 1 1 / 1 8 / 2 0 0 3
Pa g e 3
w w w . j l a u d i o . c o m
➔
➔
STEP 16:
Use masking tape to mark cutting
template.
IMPORTANT!!!!
Please read
STEP 16 A
and
B
before cutting.
Using a suitable saw to cut OEM inner
console.
IMPORTANT!!!!
A)
Cut 1 1/2” under lip. Where there is no
ledge/reinforcement
IMPORTANT!!!!
B)
Where there is a ledge/reinforcement cut
1 5/16” under the ledge/reinforcement.
