Continued on Next Page
SB-F-EXPL3/10W3v3 INSTR_SKU# 011325
S T E P 7
Begin unclippng the side panel, as shown.
S T E P 6
Open the rear door on the passenger side. Carefully pull up
on the sill panel to release the clips, and remove the panel.
Remove the clip holding the side panel to the floor.
S T E P 5
Unscrew the two hooks on the side panel.
S T E P 4
Fold the seats back up, as shown. Carefully pull up on the
rear sill panel to release the clips. Unplug the harness, and
remove the panel.
1BHFr+-"VEJP*OD
S T E P 9
Pictured is the factory subwoofer enclosure with the side
panel removed. Unplug the subwoofer harness. Locate and
remove the three bolts holding in the enclosure, and remove
the enclosure from the vehicle.
S T E P 1 1
Enlarge the grille opening on the side panel by cutting on
the indicated dotted lines. The top and bottom portions of
the grille opening need to be removed, but the sides will
remain.
S T E P 1 0
Carefully grind through the plastic welds on the back of the
side panel to remove the grille from the panel.
S T E P 8
Continue toward the rear of the vehicle, carefully releasing
the remaining side panel clips, and remove the panel.
