background image

Page 6 • JL Audio, Inc., 2019

CO N G R AT U L AT I O N S!

You have completed the installation for this model!  Enjoy your new Stealthbox®!

M I D/H I G H  FR E Q U E N C Y  D R I V E R  FI TM E N T

VeX™ Enclosed Speaker Systems are ideal for powersports and off-road vehicle applications.  Each

weatherproof pod can be mounted to a roll cage precisely aimed for optimum sound.  Mounting

fixtures are available to fit a variety of roll cage diameters.

S T E P 19

Wrap a Stainless Steel Cushion Clamp over the 

outside front frame rail, aligning its holes with 

the threaded insert in the top of the enclosure.

Slide a 1/4” Split Lock Washer and a 1/4” Flat 

Washer over a 1/4 - 20 x 1-1/2” Socket Cap 

Screw, pass the assembly through the holes 

in the Stainless Steel Cushion Clamp, and into 

the threaded insert. Repeat the process for the 

inside front frame rail, then fully tighten.

S T E P 18

Slide a 1/4” Split Lock Washer and a 1/4” Flat 

Washer over each of four 1/4 - 20 x 1-1/2” 

Socket Cap Screws.

From under the vehicle, pass each assembly 

through a drilled hole in the plastic floor panel, 

into a threaded insert in the bottom of the 

enclosure, and fully tighten.

S T E P 17

Connect and reinstall the subwoofer and eight 

subwoofer mounting screws.

S T E P 20

Carefully reinstall the seat, and pass the 

seat belt back through the openings in the seat 

back. Connect the seat belt harness (driver’s 

side only). Reinstall the rear seat nuts, seat belt 

bolts, and front seat bolts.

Note:  For optimum performance, we

recommend applying the included Foam Strips 

(or sound damping material) to surrounding 

plastic panels to reduce unwanted vibrations.

All specifications are subject to change without notice. “JL Audio®” and “How we play®” are registered trademarks of JL Audio, Inc. “Ahead of the Curve” and its respective logo are trademarks 

of JL Audio, Inc.
Printed in USA  •  ©2019 JL Audio, Inc.  •  For more detailed information please visit us online at

 www.jlaudio.com.

(954) 443-1100

w w w. j l a u d i o . c o m

JLA-SKU# 011529 • ver. 09.05.2019

 

• 10369 NORTH COMMERCE PARKWAY • MIRAMAR, FLORIDA • 33025 • USA

®

SB-CAN-G2MVX3D/10TW3 & SB-CAN-G2MVX3P/10TW3  INSTR_SKU# 011529

*011529*

Содержание Stealthbox SB-CAN-G2MVX3D/10TW3







Отзывы: