Continued on Next Page
SB-F-EDG/10W3v3_INSTR_SKU# 011254
s t e P 1 5
Place a 1/4” Lock Washer and a 1/4” Flat Washer over a 1/4”-20
x 1 Bolt, and thread the assembly through the hole in the
Z Bracket and into the 1/4”-20 U-Nut, as shown, and hand
tighten.
s t e P 1 4
Slide the Stealthbox® around the Large Bracket from the top,
and press the enclosure into position, aligning the Z Bracket
and L Bracket with the two 1/4”-20 U-Nuts installed in
steps
8-9
.
Align the Large Bracket with the threaded insert at the
bottom of the Stealthbox®.
s t e P 1 3
Attach the L Bracket to the top of the Stealthbox® using a
1/4”-20 x 1 Bolt, a 1/4” Lock Washer, and a 1/4” Flat Washer, as
shown, and hand tighten.
s t e P 1 2
Attach the Z Bracket to the front of the Stealthbox® using a
1/4”-20 x 1 Bolt, a 1/4” Lock Washer, and a 1/4” Flat Washer, as
shown, and hand tighten.
Page 3 • JL Audio, Inc 2011
S T E P 1 7
Using a 1/4”-20 x 1 Bolt, a 1/4” Lock Washer, and a 1/4” Flat
Washer, attach the L Bracket to the Stealthbox®, and hand
tighten.
Next, firmly tighten all three brackets onto the Stealthbox®,
then firmly tighten the the Z Bracket and L Bracket to the
vehicle.
S T E P 1 9
Pictured is the Stealthbox® secured into position.
S T E P 1 8
Attach the speaker wire to the Stealthbox®.
S T E P 1 6
Using a 1/4”-20 x 1 Bolt, a 1/4” Lock Washer, and a 1/4” Flat
Washer, attach the Large Bracket to the Stealthbox®, and
hand tighten.
