Limited Warranty –
Electronics
(USA)
JL Audio warrants this product to be free of defects in materials and
workmanship for a period of
two (2) years
from the original date of purchase.
This warranty is not transferable and applies only to the original purchaser
from an authorized JL Audio dealer. Should service be necessary under this
warranty for any reason due to manufacturing defect or malfunction, JL
Audio will (at its discretion), repair or replace the defective product with new
or remanufactured product at no charge. Damage caused by the following is
not covered under warranty: accident, misuse, abuse, product modification or
neglect, failure to follow installation instructions, unauthorized repair attempts,
misrepresentations by the seller. This warranty does not cover incidental or
consequential damages and does not cover the cost of removing or reinstalling
the unit(s). Cosmetic damage due to accident or normal wear and tear is not
covered under warranty.
Warranty is void if the product’s serial number has been removed or defaced.
Any applicable implied warranties are limited in duration to the period of the
express warranty as provided herein beginning with the date of the original
purchase at retail, and no warranties, whether express or implied, shall apply
to this product thereafter. Some states do not allow limitations on implied
warranties, therefore these exclusions may not apply to you. This warranty gives
you specific legal rights, and you may also have other rights, which vary from
state to state.
If you need service on your JL AUDIO product:
All warranty returns should be sent to JL Audio ’s Electronics Service
Facility freight-prepaid through an authorized JL Audio dealer and must be
accompanied by proof of purchase (a copy of the original sales receipt). Direct
returns from consumers or non-authorized dealers will be refused unless
specifically authorized by JL Audio with a valid return authorization number.
Warranty expiration on products returned without proof of purchase will be
determined from the manufacturing date code. Coverage may be invalidated
as this date is previous to purchase date. Non-defective items received will
be returned freight-collect. Customer is responsible for shipping charges and
insurance in sending the product to JL Audio. Freight damage on returns is not
covered under warranty.
For Service Information in the U.S.A. please call
JL Audio Customer Service:
(954) 443-1100
9:00 AM – 5:30 PM (Eastern Time Zone)
JL Audio, Inc.
10369 North Commerce Pkwy.
Miramar, FL 33025
(Do not send product for repair to this address)
International Warranties:
Products purchased outside the United States of America are covered only
by that country’s distributor and not by JL Audio, Inc.
Specifications
General
Operating Voltage 10 - 16V DC
Current Draw Standby: 5 mA / Maximum: 15 A
Fuse Value 15 A
NMEA 2000® LEN 1
Temperature Range Operating: -4 F to +140 F (-20 C to +60 C)
Storage: -22 F to +185 F (-30 C to +85 C)
Water Resistance Rating IPX2
Compliance FCC Part B, subpart J; CE per EN 60945; C-Tick
Dimensions 9.08 in. x 4.39 in. x 2.21 in. (231 mm x 112 mm x 56 mm)
Weight 1.96 lbs (0.88 kg)
Audio Outputs/Inputs
AUX In 1, AUX In 2 and
MIC/High Level
Input Sensitivity
1V RMS
Zone 1 & Zone 3
RCA Outputs 2V RMS
Zone 1 & Zone 2
Speaker Outputs 30W RMS x 4 @ 4 Ω
Frequency Response 20 Hz - 20 kHz
S/N Ratio 95 dB (Referred to 1 W)
Total Harmonic Distortion <1% @ 4 Ω (Referred to 1 W, 4 Ω load, 20 Hz - 20 kHz)
Tuner
FM Tuner
US: 87.9 to 107.9 MHz
EU: 87.5 to 108.0 MHz
JPN: 76.0 to 90.0 MHz
AM Tuner US: 530 to 1710 kHz
EU: 531 to 1611 kHz
Bluetooth®
Profile A2DP, AVRCP, PBAP, HSP
Core Specification v4.0
Codec SBC
Connection Range: Up to 35 ft / 11 m
USB
Interface v1.1, v2.0
Maximum Charge Capacity 1 A
File Support Type FAT16, FAT32, NTFS
Apple Compatibility iPhone5 / iPod Touch 5 and beyond
Regulatory Statements
This device:
• complies with CE under R&TTE directive 1999/5/EC
• complies with the requirements of level 2 devices of the Radio communications
(Electromagnetic Compatibility) standard 2008
• This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Industry Canada IC RSS-GEN, Sec 7.1.3 Warning Statement
(Required for license-exempt devices.)
This device complies with Industry Canada
license-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause unde-
sired operation of the device.
Le présent appareil est conforme aux CNR d’In-
dustrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée
aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage,
et (2) l’utilisateur de l’appareil doit accepter
tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le
fonctionnement.
Warning
The user is cautioned that any changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that the interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that of the receiver
• Consult the dealer or an experienced technician for help
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
Countries of intended use in the EU
AT - Austria
BE - Belgium
BG - Bulgaria
CH - Switzerland
CY - Cyprus
CZ - Czech Republic
DE - Germany
DK - Denmark
EE - Estonia
ES - Spain
FI - Finland
FR - France
GR - Greece
HU - Hungary
IE - Ireland
IS - Iceland
IT - Italy
LI - Liechtenstein
LT - Lithuania
LU - Luxembourg
LV - Latvia
MT - Malta
NL - Netherlands
NO - Norway
PL - Poland
PT - Portugal
RO - Romania
SE - Sweden
SI - Slovenia
SK - Slovakia
TR - Turkey
UK - United Kingdom
AUX IN 1
FM ANT
AUX IN 2 Zone 1 OUT Zone 3 OUT
NMEA 2K
USB
PWR
(L)
(1)
(2)
(R)
3.07 in.
78 mm
4.39 in.
112 mm
8.65 in.
220 mm
9.08 in.
231 mm
2.21 in.
56 mm
MM80-HR-MAN 051617
IPX2 Water Resistance Rating
This product has been tested to withstand dripping water when rotated 15
degrees in any direction from vertical for at least 10 minutes. Note - while
designed to be water resistant, this product should never be submerged under
water or exposed to heavy spray/splashing that exceeds its rating.
