JL Audio MediaMaster I05, Руководство пользователя

Страница: 5 / 43

9 8
AUDIO ZONE MENU SETTINGS
• Long press to access the
System Settings: Main Menu
• Rotate to navigate
• Press to make selections
Zone Function Setting 1 Setting 2
Z1: Zone 1
Z2: Zone 2
Z3: Zone 3
Z4: Zone 4
Level Control Mode
Relative: Links the volume levels of
Zones 2 - 4 with the level of Zone
1. (Linked zones will proportion-
ally follow Zone 1’s volume.) Each
zone’s offset level is independently
adjustable, allowing you to create
a customized level controller,
specific to a vessel’s layout.
Absolute: Creates an independent
level control for selected zones,
each with its own separate volume
level slider.
Fixed
4V RMS Max (default)
2V RMS Max
1V RMS Max
Off
Rename Zone
Bow, Bridge, Cabin, Cockpit,
Galley, Helm, Stateroom 1,
Stateroom 2, Tower, Transom
Custom Name
Alphanumeric Input
Factory Default
Max Volume Limit Max Vol Limit
Sub 1
Sub 2
Sub 3
Sub 4
LPF ( Low Pass Filter)
Off (default)
60 Hz
80 Hz
100 Hz
Sub Off
Z2: Zone 2
Z3: Zone 3
Z4: Zone 4
Tone Control Mode
Same as Zone 1
Independent Tone Control
SYSTEM MENU SETTINGS
• Long press to access the
System Settings: Main Menu
• Rotate to navigate
• Press to make selections
Setting Function
Name this Device
Create a custom name to display on connected Bluetooth devices
and NMEA 2000® networks
Audio Zone Setup Configures each set of audio zone outputs
AUX Input
Sensitivity
Configures AUX input sensitivity: 2V or 1V RMS (default)
Diagnostic Displays serial number, hardware and software version info
Display Configures display and brightness settings
Low Voltage Alert
Built-in alert notifies when
+12VDC supply voltage drops
below 10 volts
If triggered, the unit will enter Safe
Mode with a message to turn the
unit off until normal operating
voltage is restored.
Scrolling Text Enables continuous scrolling of available RDS/track text info
Tuner Region
Configures AM/FM tuner range/scale for a specific region;
DAB+ replaces SiriusXM outside of North America
Power-up Settings Configures display activation upon connection to power