2
JL AUDIO
M6-10IB/M6-10W
A
B
E
D
C
SPEAKER
SPEAKER
LIGHTING
A l l s p e c i f i c a t i o n s a r e s u b j e c t t o c h a n g e w i t h o u t n o t i c e .
PHYSICAL SPECIFICATIONS
Subwoofer Parameters
M6-10IB
M6-10W
Free Air Resonance (Fs):
43.76 Hz
34.58 Hz
Electrical “Q” (Qes):
0.907
0.522
Mechanical “Q” (Qms):
11.315
9.780
Total Speaker “Q” (Qts):
0.840
0.496
Equivalent Compliance (Vas):
0.98 ft
3
/ 27.75 litres
1.22 ft
3
/ 34.49 litres
One-way, Linear Excursion (Xmax)*:
0.52 in / 13.2 mm
0.52 in / 13.2 mm
Efficiency (1W/1m)**:
86.1 dB SPL
86.4 dB SPL
Effective Piston Area (Sd):
50.11 in² / 0.0323 m²
50.11 in² / 0.0323 m²
DC Resistance (Re):
4.543 ohm
3.619 ohm
Nominal Impedance:
4 ohm
4 ohm
Infinite Baffle Use:
Yes
No
Enclosure Use:
Yes (Sealed & Ported)
Yes (Sealed & Ported)
Power Handling (continuous):
250W
250W
* Xmax specifications are derived via one-way voice coil overhang method with no
correction factors applied.
** Efficiency (1W/1m) is not an accurate indicator of a subwoofer’s output capability
and should not be used as a comparison to other subwoofers to determine which
one is “louder” !
Subwoofer Physical Specifications
Nominal Diameter
10 in / 250 mm
Outer Diameter (A)
10.75 in / 273 mm
Bolt Hole Circle (B)
9.70 in / 247 mm
Frontal Grille Protrusion-Classic* (C)
1.66 in / 42 mm
Frontal Grille Protrusion-Sport* (C)
1.66 in / 42 mm
Mounting Hole Diameter (D)
8.875 in / 225 mm
Mounting Depth (E)
5.90 in / 150 mm
Net Weight
12.60 lbs / 5.70 kg
Driver Displacement
0.052 ft3 / 1.47 litres
* Frontal grille protrusion measured from mounting surface (Sport Grille Pictured)
INCLUDED PARTS
• One Polymer Subwoofer Grille
• One Polymer Subwoofer Grille Trim Ring
• Six #10 x 1 5/8-inch (41 mm) Phillips pan-head stainless-steel screws
• Six #10 stainless-steel washers
LED Equipped Models
Integrated Transflective™ RGB LED lighting system (patent-pending) delivers
smooth, even accent illumination, with no hot spots. LED functionality requires
separate wiring at each speaker location. Adjustable control of RGB lighting requires
the use of an RGB lighting controller (sold separately). For optimal performance, we
recommend using the JL Audio marine lighting controller (MLC-RW).
We recommend the use of this speaker in a bi-amplified system using high-quality satellite
speakers and amplifiers. We do not recommend the use of this subwoofer with a passive
crossover (coil), as this type of device will adversely affect performance.