background image

JX

250/1D • 

JX

500/1D • 

JX

1000/1D

 

 

9

ENGLISH

“BASS BOOST” CONTROL

The JX monoblock includes a single band, 

boost-only bass equalizer controlled by a rotary 
knob marked 

“Bass Boost”

. This control has a 

boost range of 0dB (full-counterclockwise) to 
+12dB (full-clockwise) and is centered at 45 Hz. 

 

REMOTE LEVEL CONTROL

With the optional RBC-1 Remote Level 

Control (sold separately), you can control the 
subwoofer volume from the front of the vehicle.

The RBC-1 connects to the jack 

labeled 

“Remote Level Control”

 on the 

Connection Panel of the JX Monoblock 
amplifier, using a standard telephone 
cable (supplied with the RBC-1). 

When connected to the amplifier, the 

Remote Level Control operates as follows. 
At full counter-clockwise rotation, the audio 
will mute completely. At full clockwise 
rotation the level will be the same as if 
the RBC-1 was not connected at all. In 
other words, it operates strictly as a level 

attenuator.  

This control will not affect the

 

"Bass Boost"

 feature of the JX Monoblock.

Care should be taken to securely mount this 

control in a manner that does not interfere with 
vehicle operation.

When setting the amplifier’s input sensitivity, 

the Remote Level Control should be unplugged or  
at full clockwise rotation (maximum level).

 

Содержание JX1000/1D



















Отзывы: