JL Audio FATHOM ICS-SYS-108, Руководство по установке, Страница: 23 / 36

Page 23 | Fathom ICS
IN-CEILING INSTALLATION
Type: IC-2
Understanding the L-Bracket
Extensions continued...
The L-Bracket Extensions (Part I)
and L-Brackets (Part J) are attached
to the enclosure using #8 pan head
screws. Refer to the info listed below
for specific screw quantity and length
criteria.
(Figure 16 & 17)
• A total of (8) #8 x 1.50-inch pan
head screws must be used to
attach each L-Bracket Extension
(Part I) to the enclosure. Screws
should be evenly spaced and
not intrude upon L-Bracket
installation. Note: Any #8 x 1.50-
inch pan head screws substituted
to attach the L-Brackets to the
L-Bracket Extensions (below)
may count towards the (8) screw
total requirement (above).
• Each L-Bracket (Part J) attaches to
the L-Bracket Extensions (Part I)
using (4) #8 x 1.00-inch pan head
screws.
Note: Substitute #8 x 1.50-
inch pan head screws at any pilot
holes positioned directly over the
enclosure.
• Use (1) #8 x 1.00-inch pan head
screws to lock the position of each
L-Bracket (Part J).
Figure 17
Figure 16
Substitute #8 x 1.50-inch pan head screws
at any pilot holes positioned directly over
the enclosure.