Bluetooth Wireless Technology
5
Pairing to a Cell Phone
Daptor Three in
Headset Mode
(pg7)
1.
From the
powered-off
state*,
press and hold the
MFB
button on
Daptor Three for approx.
6
seconds.
Upon release, the blue LED will
flash rapidly as Daptor Three enters
Pairing Mode
.
The Stereo LED will flash
Red
during the
button press to verify Headset Mode.
2.
On your device, find and select the
option to set up a connection. Once
found, Daptor Three's device ID is
"JKDAP3xxxx"
where:
xxxx
is the
last four digits of the serial number.
Note:
Connecting via
Bluetooth
wireless
technology varies with different cell phones.
3.
If asked for a pin, enter "
0000
".
4.
When bonding is complete, the blue
LED will flash at a slower rate.
Pairing to a Headset Device
Daptor Three in
Master Mode
(pg7)
1.
Following manufacturer’s
instructions, set your headset type
device to
Pairing Mode
.
If the Pin on the headset device is not
"0000", Daptor Three will not be able to pair
with it.
2.
From the
powered-off
state*,
press and hold the
MFB
button on
Daptor Three for approx.
6
seconds.
Upon release, the blue LED will
flash rapidly as Daptor Three enters
Pairing Mode
.
The Stereo LED will flash
Green
during the
button press to verify Master Mode.
3.
When bonding is complete, the blue
LED will flash at a slower rate.
Bluetooth Wireless Technology
