3
Getting To Know your BlueSet
Getting To Know your BlueSet
3. Power
BlueSet should be fully charged
before its first use. While this
battery will normally charge in
about 2 ½ hours, please allow 4-5
hours for this first charge, or until
the LED turns off.
Connect the USB cable to the mini
USB connector on your BlueSet
and a USB power source to charge
the battery. The red LED will
flash to indicate that the battery
is charging, once charging is
complete, the LED will turn off.
If the battery becomes completely
discharged for an extended period
of time, the red LED will not flash
until it can begin its charge cycle.
This may take several minutes.
If the USB cable is connected
when the unit is shut down, the
blue LED will stay lit. If the unit is
in use, the blue LED will indicate
the current connect mode. Feel
free to use your BlueSet while it
is charging.
4. Recording Output
A 3.5 mm stereo output jack
contains a mic level signal suitable
for recording, with the clean mic
signal on the left channel and the
Bluetooth
return audio on the right.
Mic Trim
A small flat blade screwdriver can
be used to adjust the
<Mic Trim>
pot on the back of the unit. This
adjusts the level of the audio
coming from the microphone as
it is sent to the
Bluetooth
enabled
device and to the recording output.
