6
BlueDriver-F3
Wireless Audio Interface
Bluetooth Wireless Technology
Pairing to a Cell Phone
1.
While BlueDriver is off, set the
Role
Select
Switch
to
<Phone>.
2.
From the
powered-off
state*,
hold the <
Connect>
button on the
BlueDriver for at least
6
seconds.
Upon release, the blue LED should
flash rapidly as the BlueDriver
enters
Pairing Mode
.
* See page 8 for instructions on how to turn
off BlueDriver-F3.
3.
On your device, find and select
the option to set up a connection.
When the cell phone has found
the new device, select from the list
the device ID. Depending on the
gender of model, the device ID is
"JKBDRVF3xxxx"
where:
xxxx
=
last four digits of the serial number.
Note:
Connecting via
Bluetooth
wireless
technology varies with different cell phones.
4.
If asked for a pin, enter "
0000
".
5.
When bonding is complete,
the blue LED will flash at a rate
of
2
seconds
off,
1
second
on.
(
2
s
off
,
4
s
on
for HD Voice).
Subsequent connections can be
made more quickly from
Idle Mode
by holding the <
Connect>
button
for only
2
seconds before releasing.
