Indicator convert flashing blue to flashing green or always green.
(1) Install the mobile phone bracket in the slot of the back of
the remote controller as shown.
(2) Pull up the mobile phone bracket.
(3) Put the mobile device on mobile phone bracket.
(4) Adjust the mobile phone bracket and mobile phone to the
right angle.
DF806
3
(4). Self-inspection and pairing
After power on the aircraft,ensure that the level of the aircraft is positioned more than 30seconds to make the aircraft
complete self-inspection,when indicator convert flashing blue to flashing green or always green,which means pairing has
been successful.
3). Put the mobile device on mobile phone bracket
4). Connect APP
(1). State of GPS signal state after connecting APP with aircraft
When the APP is connected to the aircraft,the aircraft status indicator is green, indicating that the GPS signal is good and
the positioning is successful. Transfer the flight mode on the remote control to the GPS mode, the aircraft can take off
safely.
The indicator light of aircraft shows green flashing,which means GPS signal is weak or no signal at all,change flight mode to
A mode on RC,the aircraft can take off (The difficulty of this operation is high,highly not recommend for beginners).
Note: It is highly recommended to fly under good GPS signal(Green light always on)!
Please choose a wide open environment. Tall steel buildings and metal material will interfere the
compass and GPS equipment on the aircraft.
