JJC WT-868, Инструкция по эксплуатации

Страница: 18 / 24

Wireless Timer Remote Control
After complete the timer setting of the WT-868TX, Press the START/STOP button of the transmitter. The
transmitter will send all the setting data to the WT-868RX. Once the receiver get all the data, it will start
and “TIMER ACTIVE” will flash in the control panel of the receiver. Between each shot, the control panel
will show the time remaining until the next photograph is taken. If the transmitter speaker is ON, a beep
will sound three times at ONE-SECOND intervals before the shutter opens.
While the shutter is opened, the control panel will show the time remaining until the shutter closes, and
the release lamp and “RELEASE” indicator will flash at ONE-SECOND intervals. The number of shots
remaining will be updated each time a photograph is taken.
1. Flashes while timer is active
2. Between shots : Time remaining until next
shot.
While shutter is open : Time remaining until
shutter closes.
3. Number of shots remaining
4. Flashes while shutter is open