JISPRO, http.//www.mujobchod.atlas.cz./jispro, e-mail: [email protected]
4
5
JISPRO, http.//www.mujobchod.atlas.cz./jispro, e-mail: [email protected]
23.
Carefully glue the other side of the guide tube into
the fuselage.
24.
Check the free movement of the pushrod.
25.
Drill the holes for the horns in the butterfly tail
control surfaces. Use the horns with 0.6 mm holes (find
the proper ones in the accessories supplied).
26.
Glue the horns and insert the pushrod.
27.
Using the pliers bend one pushrod, check the equal
position of both control surfaces and bend the second
pushrod. Finally fix both pushrods in the same way as
the ailerons.
28.
Glue the servo tray (supplied in the accessory
package) using cyanoacrylate.
29.
Drill the hole for the subsequent tightening of the
pushrod fixing screw.
30.
Apply the heated glue and fix the servo.