A right-angle
Neon LED Strip instruction and caution
Straighten the LED strip
parallelly during normal service.
Bend the LED Strip inward or
outward around the curve.
(Attention: keep the curved
radian
≥
120mm)
Once need a turing, lateral
bending around the curve is
allowed only. Don't twist the
light-emitting area.
(Attention: keep the curved
radian
≥
120mm)
During normal service, do not
bend LED strips with its back
side up and front side down.
The LED strip cannot be distorted
during normal service.
During normal service,once need
a turning,must keep the curved
radian
≥
120mm and couldn’t be
a right-angle.
Distortion
Parallelly
R
≥
120mm
R
≥
120mm
www.
jisoiluminacion
.com
4/4
Installation Instructions N200414 // Jelly XL
