JINOU BLE5.0 Series, Руководство пользователя

Страница: 13 / 26

9
10. Set/Inquire Flow Control Mode
Command Answer Parameter
AT+FLOWCONTROL =< enable >< CR >
< LF >
< CR >< LF > OK < CR >< LF >
< enable >:
0:No flow control
1:Adopting hardware
flow control
Default: 0
AT+FLOWCONTROL ?< CR >< LF > < CR >< LF > OK < CR >< LF >
< CR >< LF >+ FLOWCONTROL
：
< enable >< CR >< LF >
For applications with large data volumes, it is strongly recommended to use hardware flow control,
otherwise data loss will occur.
11. Set/Inquire Authentication Mode
Command Answer Parameter
AT+AUTH=<enable> < CR ><
LF >
< CR >< LF > OK < CR >< LF >
<
enable
>:
0:No authentication
1: authentication
Default:0
AT+AUTH? < CR >< LF > < CR >< LF > OK < CR >< LF >
< CR >< LF > +AUTH: < enable >< CR >< LF >
12. Set/Inquire Password
Command Answer Parameter
AT+PASSWORD=<password> < CR ><
LF >
< CR >< LF > OK < CR >< LF >
<password>:
range
000000
～
999999
Default: 000000
AT+PASSWORD? < CR >< LF > < CR >< LF > OK < CR >< LF >
< CR >< LF > +PASSWORD: < passwo
rd >< CR >< LF >
13. Scan Around BLE Device
Command Answer Parameter