Mifare & ISO14443A & ISO14443B & ISO15693 & ISO7816 Module
http://www.jinmuyu.com
Copyright © 2003-2014 Jinmuyu Electronics Co., LTD. All rights reserved.
2/6
1
Product introduction
JMY6801H is a RFID read/write module with UART, IIC, RS232C or USB port. JMY6801H
has various functions and supports multi ISO/IEC standard of contactless card. The RF protocol is
complex. The designer combined some frequent used command of RF card and then user could
operate the cards with full function by sending simple command to the module. The modules build in
SAM slot. It could operate contact smart card according to ISO7816.
The module has a length of 506 bytes command buffer could send APDU over 256 bytes to
T=CL smart cards and SAM cards. The modules support FSDI=8 of ISO14443-4. The module and
antenna is integrated. The impedance between RF circuit and antenna was tuned by impedance
analyzer, and then the module has excellent performance and stability. There is ferrite plate between
main PCB and antenna, so such design applies to some metallic-around systems.
2
Characteristics
PCD model:
NXP CL RC632
Working frequency:
13.56MHz
Supported standard:
ISO14443A, ISO14443B, ISO15693, ISO7816
Card supported:
Mifare 1K/4K, FM11RF08, Ultra Light, DesFire, Mifare ProX,
SR176, SRI512, SRI1K, SRI2K, SRI4K, SRIX4K, T=CL CPU cards(both ISO14443A &
ISO14443B), TI Tag It, I. Code SLI, ST LRI and other tags according to ISO15693, and
ISO7816 SAM cards (both T=0 & T=1)
Anti collision ability:
Full function anti collision; be able to process multi-cards; be able
to set operate single card only
Auto detecting card:
Supported, default OFF. The default state can be set.
SAM slot:
2 slot
SAM baud rate:
9600bps/38400bps/19200bps(default)/115200bps/57600bps.
ISO7816 PPS set:
Supported
EEPROM:
512 Bytes
Power supply:
DC 5V (±0.5V)
Interface:
IIC/UART/RS232C/USB HID (select when place order)
Communication rate:
IIC:
400Kbps
UART/RS232C/USB:
19.2Kbps/115.2Kbps
USB: USB 2.0 HID
Max. command length:
JCP04 254 Bytes; JCP05 510 Bytes.
Interface level:
UART/IIC: 3.3V (TTL level; 5V tolerance)
Power consumption:
150mA
Operating distance:
80mm (depending on card and antenna design)
Dimension:
70mm*50mm*16.5mm
Weight:
About 120g
ISP:
Supported
