CONNECTORS
WBT connectors, bi-wiring design
.
CONNECTIVE CABLE
Tweeters, midwoofer and woofer utilize OCC Teflon insulated cable.
SPECIFICATION
Design
：
4.5-way vented-box
Frequency range
：
32Hz
－
40kHz.
Sensitivity
：
94dB
/
W
/
m
Impedance
：
8 ohms (minimum 6.4 ohms)
Power requirement
：
50
－
300W recommended.
Dimensions(HWD)
：
186.8cm
×
38.4cm
×
51.8cm(73.54
″
×
15.12
″
×
20.39
″
).
Net weight
：
108kgs
/
pc (238lb
/
pc)
PRODUCT PURPOSE
To be used in high quality HiFi music system and can also be combined with home theater system.
THE PLACEMENT AND INSTALLATION OF LOUDSPEAKER
The size of the room, the treatment of the wall and floor surfaces, the position of furniture and the
placement location of the loudspeakers in the room are all factors to
achieve optimal sound reproduction. Please carefully read the following
references
：
z
It is recommended the loudspeakers and the listener to be in the
direction of long axis.
Please see the fig.1.
If the loudspeakers and
listener are located in the direction of short axis, the sound quality
will not be as refined due to wall reflections. If you have no choice
to set up this way, you may need to do some sound absorbing
treatment on the front and back walls. The shape and size of the
room have a great influence in the outcome. You should experiment
with positioning a number of times to find the SWEET SPOT.
z
The optimum height for the loudspeakers placed on the floor, the
center of the ribbon tweeter should be on the same level
with your ear when you sit on your accustomed seat.
Please see the fig.2.
z
Do not place the loudspeakers near walls or corners.
fig. 1
Usually, the distance between the back of
the loudspeaker and the wall is a minimum
of 1m
/
40
"
; the distance from the side of
the loudspeaker to the nearest wall is a
minimum of 0.8m
/
32
"
. Of course, the
optimum position will depend on room
size and layout. Please assure that the
optimum position can be found as long as
you move the loudspeaker several times.
z
If you position the loudspeakers too close
to the wall or corners, it will increase the
bass response and at the same time becomes cloudy and will loose imaging.
z
If the wall and floor surface is too smooth, it will increase sound reflections and lengthen the
reverberation time and hence makes the sound muddy. If you meet these circumstances, you must
do some partial treatment to the wall and floor. Sound quality will improve if you install a wall
hanging and place a rug in front of the loudspeakers on the floor.
2
