24
Chapter 9 Package and Warranty
9.1 Complete
The instrument should have the following items when it leaves the factory:
No.
Name
Quantity
1
JK9306 instrument
1 set
2
Three-wire power cord
1 piece
3
Fuse
1 piece
4
CD
1 piece
5
Warranty card
1 piece
6
Product certificate
1 piece
7
Test Report
1 piece
After the user receives the instrument, the above contents should be checked out of the box for
inspection. If any defects occur, please contact the company or the operating department
immediately.
9 .2 Logo
The following symbols appear on the panel or nameplate of each instrument.
1) Manufacturer's name or trademark;
2) Product name and model;
3) Product number and manufacturing date;
4) License mark and number for manufacturing measuring instruments;
5) Test terminal flag;
9.3 Packaging
The measuring instrument is usually packed in a dust-proof, shock-proof and moisture-proof
rugged box with plastic bags along with accessories, spare parts, instruction manuals and product
certifications.
9.4 Transport
The meter should be handled carefully during transportation, protected from moisture and rain.
9.5 Storage
The measuring instrument should be stored in a ventilated room where the ambient temperature
is 5
℃ ～
40
℃
and the relative humidity is not more than 85%. The air should not contain
harmful impurities that corrode the measuring instrument.
9.6 Warranty
Warranty period: If the user purchases the instrument from the company, it will be calculated
from the company's shipping date, and from the operating department's buyer, it will be
calculated from the operating department's shipping date. The warranty period is two years. The
warranty card should be issued for the instrument. During the warranty period, if the instrument
is damaged due to improper user operation, the maintenance cost shall be borne by the user. The
instrument is maintained by our company for life.
This instrument must be repaired by professional technicians. Please do not replace the internal
components of the instrument during maintenance. After repairing the instrument, you must
re-measure and calibrate to avoid affecting the test accuracy. Due to the user's blind
maintenance, damage to the instrument caused by replacement of instrument parts is not
covered by the warranty, and the user should bear the maintenance costs.
